Get This Free Cheat Sheet Guaranteed To Help Your Next Mix

Showing posts with label Gateway Mastering. Show all posts
Showing posts with label Gateway Mastering. Show all posts

Wednesday, March 5, 2014

When Audio Cables Cost More Than Cars

During a recent interview with mastering legend Bob Ludwig of Gateway Mastering for the 3rd edition of The Mastering Engineer's Handbook, he mentioned that he rewired his entire studio with Transparent Cable and both he and his clients were astonished at the improvement in sound. I wasn't familiar with the brand so I decided to check it out.

Talk about high end, here's an example of the company's most expensive power cable (from their online catalog).

Their power cables are priced from $195 to $2100 (I usually pay about a buck).






Okay, if a $2100 hundred dollar power cable isn't enough for you, how about an RCA cable for $11,580?

In fairness, they also sell RCA cables as low as $95 (I'm used to buying them for around 50 cents).






Perhaps you're looking for speaker cable. Here's one that goes for $34,735.

Of course, they also have them for as low as $210.







And of course, we all need lots of XLR mic cables around. How about buying a few of these babies for $20k each?

They also have them for as low as $485.

Normally I would scoff at the perceived worth of cable at this price, but I have to trust Bob Ludwig on this. All I know is that it's out of my price range until I have about 5 hit records.

Does anyone reading have experience with these cables? Comments?
----------------------------------

You should follow me on Twitter and Facebook for daily news and updates on production and the music business.

Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.

Thursday, March 22, 2012

Bob Ludwig On Mastering For Earbuds

Bob Ludwig at console image from Bobby Owsinski's Big Picture production blog
In the world of audio mastering, there's none more esteemed than Bob Ludwig. Bob was a classically trained trumpet player before becoming a mastering engineer for producer Phil Ramone's A&R Recording, then eventually worked his way up to chief engineer at Masterdisk. In 1993 he built his own Gateway Mastering in Portland, Maine, which even though it's not in a main media center, still has a who's-who list of celebrity clients.

Recently Bob did an interview with the Huffington Post regarding separate "iPod mixes" and the loudness wars. You can read the entire interview here, as well as find the link for the second part of the interview.
------------------
"Given how many people listen to music on portable digital players, do you find that producers are mixing for earbuds? Is it common to find an "iPod mix" that you master separately?
Bob Ludwig: No it isn't. Dr. Floyd Toole (of Harman International, the makers of JBL speakers) showed that averaging all the different consumer speakers (some bright, some with too much bass or midrange etc.) one ends up with a very flat curve which is empirical proof that mastering with an extremely accurate and flat playback system yields a product that sounds correct on more systems.

Like speakers, earbuds run the gamut from the old stock Apple earbuds that sounded tinny and lacking warmth to top-of-the-line Shure earbuds that are extremely accurate, to "hip-hop" earbuds that are overly bass heavy. One must master to sound as good as possible on all systems.

Almost all pop mixes are mixed with the bass and kick drum panned to the center which is proper as many people will be listening on boom boxes which have limited power and having a powerful center channel bass available to both speakers is ideal. Very early recordings of The Rolling Stones and The Beatles (to name two groups) were totally intended for mono and were recorded on 2-channel or 3-channel tape decks solely for creating a mono-only mix. When stereo became popular these early multi-track tapes were re-purposed for stereo and the bass and kick drum were typically locked into either the right or left channel.

With earbuds and headphones, this is very unnatural sounding and sometimes it is decided to filter the low bass into the center by mono-ing the signal somewhat. This sounds much better. This is definitely a decision based on current widespread use of earbuds, and it remains an important philosophical question when doing re-issues of old recordings with this problem.

Can you explain how the "loudness" of a mix becomes a factor in mastering? Can you explain compression and how it affects you at the mastering stage?
Bob Ludwig: Compression uses a piece of hardware or software plug in which either enhances or most often limits the dynamic range of the music being fed into it. Compression is crucial to pop music. Live pop music is almost always performed at hearing damaging levels, way above the 85dB SPL OSHA threshold for start of possible hearing loss. In order for this immense power to be even somewhat realistically reproduced on consumer systems the pop sound pipeline must be compressed so that musically the performance has the extra energy that the live performance had. For pop music, this translates as a very musical thing. ("The Loudness Wars" video illustrates.)

This problem starts from the fact that human beings, when hearing two examples of the exact same musical program but with one turned up only +0.5 or 1dB, almost all listeners who don't know exactly what they are hearing choose the louder one as "sounding best." Fair enough.

So through the years, the louder example is eclipsed by a yet louder example winning the hearts and minds of the artist, the engineer and the A&R person. At some point, the music is so loud and unnaturally compressed that the aural assault on the ear, while very impressively loud, has sucked the life out of the music and makes the listener subconsciously not want to hear the music again.
At an Audio Engineering Society workshop I was recently in about loudness, Susan Rogers from Berklee College talked about the hair cells in our ears that receive music and she pointed out that loud compressed music does not "change" as much as dynamic music and notes that "we habituate to a stimulus if it stops changing. Change 'wakes up' certain cells that have stopped firing. This is cognitively efficient and therefore automatic."

In other words, there are very physical reasons why too much compression turns off our music receptors. Every playback system ever manufactured comes with a playback level control. If one is listening to an album, one should be able to turn that control anywhere you want and the absolute level on the CD should not make a difference. Another place level on a CD does not make the difference one would think is on radio broadcast. It can be shown that in general, loud CDs sound worse and less powerful on commercial FM radio than a CD with a moderate level that lets the radio station compressors handle the loudness problem. Non-classical radio station compressors make soft things loud and loud things soft.

Two areas where producers get upset about not having enough level is the iTunes Shuffle, or even comparing songs on the iTunes software itself, and that moment at the radio station where the PD is going through the week's new releases and deciding which two or three songs will be added to his playlist. Here, sometimes having a little extra level can make a lesser song seem a little more impressive, at least at first listen.

A great example of a contemporary recording that has full dynamic range is the Guns N' Roses Chinese Democracy CD where Axl Rose wanted all the textures of the original mixes to come through and he got his wish! A good example of one of the loudest most distorted CDs is the Metallica Death Magnetic CD where apparently 10,000 fans signed a web petition to have the album remixed because they got to hear how good it sounded on Guitar Hero which did not have all the digital limiters the final CD mix had."

Read more of the interview here. You can also read an interview excerpt that Bob did for The Audio Mastering Handbook here.
----------------------------------
Help support this blog. Any purchases made through our Amazon links help support this website with no cost to you.


You should follow me on Twitter for daily news and updates on production and the music business.


Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.

Sunday, January 15, 2012

Bob Ludwig's 3 Mixing Tips

I saw this article in the Huffington Post (of all places) and I just had to excerpt some of it. Here are 3 mixing tips from mastering legend Bob Ludwig of Gateway Mastering. Of course, these a mixing tips from a mastering engineer's point of view, but excellent tips nonetheless. Go here to read the entire interview.

"Is there a top 3 "don'ts" that you have to fix in mastering?
Bob Ludwig:
1. The most common big criticism I have is not paying enough attention to the vocal. The vocal is everything to the success of a song. Make it loud enough to be able to hear the lyrics. The problem is, if the vocal level is too high, all the energy of the track disappears, if it is too low, you can't understand what is being said. If you want to be able to hear every word and you are mixing it, be sure to have a friend who does NOT know the words come in and tell you what is being sung. Once you know the lyrics, you can mix them very low and still understand them, but everyone else might miss some important words. It is hard, but crucial to get the right level.

Always cover yourself by doing one or two extra mixes with the vocal raised +0.5dB and another +1dB. Some languages need extra vocal level as more nuances of the language can easily get lost. Louder vocals are usually found on country music mixes, French and Japanese mixes.

2. Vocal sibilance not contained is a problem. As in item "1", some producers will make the vocal as bright as musically possible in order to have it be intelligible yet tucked into the track. Sometimes the vocal is simply too sibilant. These days where most big projects are being cut for vinyl it is even more important to control sibilance as it creates high amplitude, high frequency grooves that are beyond the ability of all but the best cartridges to reproduce and one gets a "spitting" sound on the sibilance. Controlling sibilance in the mix is by far the best place to do it as the de-esser will only affect the voice while de-essing during mastering necessitates compromising the brightness of the entire track.

3. A mix with a bright vocal and a dull drum sound is really a problem. The all important snare takes up a lot of spectrum and trying to brighten it with eq will make the bright vocal even brighter and quickly become unacceptable. It is a real trap that can only be helped by mastering from the TV track with a separate vocal a cappella track, something that most often is not an option."

If you're going to send you mix off to a mastering engineer, heed these points and you'll get much better results.
----------------------------------
Help support this blog. Any purchases made through our Amazon links help support this website with no cost to you.

You should follow me on Twitter for daily news and updates on production and the music business.

Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.

Wednesday, September 14, 2011

Bob Ludwig On Disc Mastering

Listening to mastering guru Bob Ludwig of Gateway Mastering speak on almost anything is a pleasure, since he's a man filled with great joy, which certainly shows in his much acclaimed work over his long career. Here's a great piece of history from the AES archives as Bob discusses the early days of disc mastering.



----------------------------------
Help support this blog. Any purchases made through our Amazon links help support this website with no cost to you.

You should follow me on Twitter for daily news and updates on production and the music business.

Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.

LinkWithin

Related Posts Plugin for WordPress, Blogger...