Like the foundation of a house, the drums are the foundation of a recording. With a strong foundation, you can build almost anything on it that you or your clients can imagine. A little effort and time spent miking the drums and getting the sound just right can result in a recording that sounds great. Here’s a list of things to check if things just don’t sound right taken from my book The Drum Recording Handbook (written with engineer Dennis Moody).Remember that each situation is different and ultimately the sound depends upon the drums, the drummer, the song, the arrangement, and even the other players. Sometimes things are just out of your control. Also, these are not hard and fast rules, just a starting place. If you try something that’s different from what you’ll read below and it sounds good, it is good!
1. Do the drums sound great acoustically? Make sure that you start with a great acoustic drum sound with the drums well tuned and minimum of sympathetic vibrations.
2. Are the mics acoustically in phase? Make sure that tom mics and room mics are parallel to each other. Make sure that any underneath mics are at a 45° angle to the top mics.
3. Are the mics electronically in phase? Make sure that any bottom mics have the phase reversed. Make sure that all the mic cables are wired the same by doing a phase check.
4. Are the mics at the correct distance from the drum? If they’re too far away they’ll pick up too much of the other drums. If they’re too close the sound will be unbalanced with too much attack or ring.
5. Are the drum mics pointing at the center of the head? Pointing at the center of the drum will give you the best balance of attack and fullness.
6. Are the cymbal mics pointed at the bell. If the mic is pointed at the edge of the cymbal, you might hear more air “swishing” than cymbal tone.
7. Is the high-hat mic pointed at the middle of the hat? Too much towards the bell will make the sound thicker and duller. Too much towards the edge will make the sound thinner and pick up more air noise.
8. Are the room mics parallel? If you’re using two room mics instead of a stereo mic to mic the room, make sure that the mics are on the same plane and are exactly parallel to each other. Also make sure that they’re on the very edge of the kit looking at the outside edge of the cymbals.
9. Does the balance of the mix sound the same as when you’re standing in front of the drums?This is your reference point and what you should be trying to match. You can embellish the sound after you’ve achieved this.
10. Are the drums placed in the best sounding part of the room? Even if you've followed everything else up to this point, if the drums are placed too close to a window or in a part of the room where the reflections "boing," chances are your drum sounds aren't going to sound as good as you want them to sound. Move them to the biggest part of the room that has the smoothest sounding reflections.
If you follow these simple tips, you'll be surprised how great your drum sound can be.
To read additional book excerpts, go to bobbyowsinski.com.
To read additional book excerpts, go to bobbyowsinski.com.
----------------------------------
You should follow me on Twitter for daily news and updates on production and the music business.
Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.
2 comments:
Bobby,
I've got to say that I just love these little checklists you do! A lot of it is common sense to a trained professional, but to a guy who is just starting out: It's the greatest bit of wisdom to be handed!
THANK YOU for WHAT YOU DO!
Not sure if you can tell, but I'm an aspiring producer, and consider you one of my heroes, and enjoy your site EVERY DAY! I've got a dog-eared and weatherworn copy of the mixing engineers handbook that I'm wearing through. You rock, Bobby!
Thank you kindly, Eric.
Post a Comment