Get This Free Cheat Sheet Guaranteed To Help Your Next Mix

Tuesday, October 7, 2014

How Not To Soundproof Your Studio

egg crate studio walls image
Don't use egg crates
Recently I received a number of questions about home studio soundproofing and they all seem to revolve around using certain materials like mattresses or carpet to do it. These aren't very good solutions however,

I've posted this excerpt from my Studio Builder's Handbook (written with Dennis Moody) before, but it seems appropriate to post it again.

I'll cover just what to do to improve your studio's isolation in another post, but first, here's what NOT to use.
  • Mattresses - There are so many things wrong with this that it’s hard to know where to start. Sure mattresses are made up of a lot of soft material, but it’s not the right kind for sound absorption, won’t affect the low frequencies at all (which are what causes most of the the isolation problems), accumulates mold and moisture, and makes nice homes for rodents and other unwanted critters. Plus, it’s pretty difficult to get enough of them to cover a room, and they take up so much space for so little benefit in return.
  • Egg Crates - Egg crates are light porous cardboard and do absolutely nothing for soundproofing. They can act as a sound diffusor at higher frequencies, but the bandwidth is so limited that they’re virtually useless there as well. Plus, they're highly flammable! It’s difficult to find enough of them to cover a room, but frankly, even using one is too many.
  • Carpet - Carpet attached to the wall is another product that will affect the sound of the room yet do nothing in the way of soundproofing since it doesn’t affect the low frequencies, which are the ones that you’ve got to control for good isolation. Carpet has exactly the same problem as mattresses in that it will begin to smell over time. Old or new carpet makes no difference, except that older carpet will smell more.
  • Foam Rubber - Foam rubber does have some acoustical absorption properties, but once again will do very little for the low frequencies that will cause all of your problems with the neighbors. It’s can be as expensive as materials with real acoustic control properties, degrades over time, and will burn like crazy if given the chance.
  • Rubber - Floor matts, mouse pads, neoprene, or any other variation of rubber will do very little to stop sound coming or going from your room. Once again, it’s much cheaper to buy proper acoustic materials that are easier to work with, but they won’t help your isolation problem either.
  • Wall Cellulose - Pumping cellulose insulation into walls can make a slight difference, but it’s marginal since there are much more effective ways to improve the isolation that are much cheaper. It can be helpful if used along with some other techniques that we’ll soon go over, but isn’t particularly effective by itself.
  • Fiberglass Insulation - Common fiberglass insulation once again has little ability to stop enough of the low frequencies that bug your neighbors, although, like with blown cellulose, it can be useful in conjunction with other techniques. Just pinning it to the wall won’t help though, but it will affect the acoustics of the room. It’s also a skin and eye irritant, takes up a lot of space, and the dust can be hazardous to your lungs when left exposed. As you’ll soon see, there’s a much better way to use fiberglass for acoustic control (although it still won’t help with isolation much).
  • Plywood Panels - It’s true that plywood panels provide mass and mass is what’s needed to stop sound transmission (especially the low frequencies), but the problem is that wood transfers sound too well so the construction technique used is crucial. Not only that, if the panels are too thin they’ll resonate and vibrate, causing an even bigger problem.
  • Particle Board - See plywood panels.
  • Bales Of Hay - Unless you live out in the country, it’s unlikely that hay bales are much of an option, but they actually do work. The problem is that they take up a lot of usable space, make a nice home for critters, and are a major fire hazard. Not recommended!
  • Acoustic Foam - Acoustic foam is helpful in controlling the acoustics within a room, but it does nothing to stop sound transmission and is expensive to boot. Acoustic foam doesn’t even begin to affect the offending low frequencies, and using too much just makes the room seem dead and uncomfortable. There are much cheaper ways to achieve a better result.
Understand that all of these materials will have at least some affect on the sound of the room (which we’ll cover later in the chapter), but will do almost nothing by themselves to help improve your isolation.

To read additional excerpts from The Studio Builder's Handbook and my other books, go to the excerpts section of bobbyowsinski.com.
----------------------------------

Monday, October 6, 2014

Nashville RCA Studio A May Be Saved

Save Studio A image
Recently I wrote about what looked like the last days of the famous RCA Studio A in Nashville. The studio had been ground zero for hits from everyone from Willie Nelson to Keith Urban, but developers had purchased the property and had planned to convert it into luxury condominiums.

Ben Folds, the current tenant of the studio, couldn't afford to purchase the studio himself, but managed to organize a groundswell of people who wanted to preserve the site in the interest of history.

After lots of press, a new buyer emerged with the intent of keeping the studio as a studio, a most wonderful turn of events. On Friday, Bravo Development announced that it had entered into a contract for the sale of RCA Studio A to AMT Trust for $5.6 million, a tidy profit over the $4.1 million the company had originally paid for it.

AMT Trust is a non-profit organization led by Leiper's Fork philanthropist Aubrey Preston, with the specific intention of saving Studio A from the wrecking ball.

The deal finalizes today at 5PM, but other potential buyers still can submit a bid until that time, so it's not a done deal yet. That said, this looks like a great victory for keeping the venerable old studio alive.

So many of the great recording facilities of yesterday have died, mostly because of soaring real estate costs. The expense of owning a major commercial studio is more than ever, but the prices that you can charge a client have actually gone down over the last 15 years. Just about the only way to save a studio like this anymore is to have it declared an historical site.

Thankfully, it looks that the piece of history that is RCA Studio A will live to see many more productive days.
----------------------------------

Sunday, October 5, 2014

New Music Gear Monday: Behringer X32-CORE Mixer

We've seen a number of evolutionary steps through the years when it comes to mixing consoles in both live sound and the studio. If we just look at the broad picture, the first evolution came when analog mixers started to pack a large number of channels and 24 inputs was considered small. The next came when gates and compressors became standard on every channel. A big one came with digital consoles, and an even bigger one with consoles that were basically just computer controllers.

But another evolution is afoot with the new series of remotely controlled consoles via a phone or tablet like the new Behringer X32-Core and Presonus RM series mixers. Today we'll look just at the X32-Core, the guts of the company's very popular X32 mixer, which takes up a single rack space and supplies 40 inputs and 25 busses. The inputs are line in only, which isn't much of a problem in a studio using outboard mic preamps. For live, the X32-Core is set up to accept the S16 digital snake that has 16 remote controllable Midas preamps and 8 outputs. Additional S16s can be cascaded as needed.

The system also comes with a Virtual Rack of 8 stereo effects that emulate some great processors like the Lexicon 480, EMT 250 and PCM70, Quantec QRS and more. The whole thing can then be controlled via a free iPhone and iPad app.

All this is made possible thanks to the new era of networked digital audio that we now live in, where AES50 network protocol over CAT5e cable is the new norm. It also provides the ability to easily connect with other digital gear for either a standard mixer or monitor hardware interface, or personal monitor systems.

The best part is that the X32-Core has a street price of $799 and the S16 is $899. That's a lot of power for not much money. Check out the websites for the X32-Core and the S16.




----------------------------------

Friday, October 3, 2014

Tunecore Publishing President Jamie Purpora On The Latest Inner Circle Podcast

Bobby Owsinski's Inner Circle Podcast
Jamie Purpora, Tunecore's president of publishing, is my guest on my latest Inner Circle podcast. We discuss the merits of  Tunecore publishing versus other publishers, foreign rights, and more. Jamie's a fountain of wisdom and experience when it comes to publishing, so there's a lot of great information to soak up.

In the intro, I'll discuss why more people are going into tech than music these days, as well as Guitar Center's labor dispute with employees.

Remember that you can find the podcast either on iTunes or at BobbyOInnerCircle.com, and now also on Stitcher
----------------------------------

Thursday, October 2, 2014

Lorde "Royals" Isolated Vocals

Lorde Performing at KCRW
Here's a very interesting example of modern vocal production. It's the isolated vocal track from Lorde's big hit "Royals." Here are a few things to listen for.

1. What you'll hear sounds like it was a center channel extraction from the original record, as you can hear bits and pieces of the other tracks slipping in along the way.

2. The song is deceptive, since it sounds so sparse as compared to other hits that you hear these days, but there are a lot of vocal layers going on, especially the background vocals. It sounds like the harmony vocals are at least triple tracked so they're very thick.

3. The lead vocal is very squashed in places, not that it bothers the ears in the final mix.

4. There's a lot more reverb on the vocal than meets the ear during the mix. It's a nice long dark hall, which is unusual in these days of shorter decays.


----------------------------------

Wednesday, October 1, 2014

Peavey Restructuring Its Business

Peavey Headquarters image
In another example of an industry in transition, Peavey Electronics recently announced an extensive global restructuring. The company is celebrating its 50th anniversary this year, which is no small accomplishment in the musical instrument/pro audio business.

The company announced that it will lay off as many as 100 factory employees at one of its hometown facilities in Meridian, Mississippi beginning on November 25th. It will also close its UK distribution center as well.

Although long trumpeted as a national success story with much of the manufacturing kept within the borders of the US, Peavey has been gradually moving some of it to Asia, primarily to keep shipping costs down to other parts of the world.

That said, product development, engineering, sales, marketing, tech support and service remain in Meridian, as well as manufacturing for its highly successful MediaMatrix digital audio distribution systems.

Unfortunately this may not be the only downsizing that we'll see in the industry this year. The business is shrinking thanks to more and better software and less need for hardware, which cuts right to most manufacturer's bottom line. Not only that, the trend is more to smaller and compact systems rather than large expensive boxes, which requires a company to be extremely nimble and efficient to survive.

Peavey has done a great job of supplying a quality product at a very reasonable price over the years. The company has grown to become one of the backbones of our business, and a strong and healthy Peavey also helps the industry stay healthy. Let's hope that this restructuring means another 50 years for the company.
----------------------------------

LinkWithin

Related Posts Plugin for WordPress, Blogger...